Chemicals - Related Information

Evaluation of the Oxidation Effect of a Photoredox Catalyst Using Methylene Blue [ PDF / 412.6KB ]

Three-Point Bending Fatigue Tests of Carbon Fiber Reinforced Plastic Using the SEM Servopulser [ PDF / 828.44KB ]

Test Speed Dependence Evaluation of Shear Strength of Adhesive and Fracture Observation [ PDF / 626.83KB ]

Infrared Spectra of Polyvinyl Chloride [ PDF / 293.1KB ]

Shear Fatigue Testing of Adhesives [ PDF / 526.63KB ]

AI-Driven Automated Column Screening and Gradient Optimization for LC Method Development [ PDF / 549.04KB ]

Comparison of Gas Analyzers for Catalyst Reaction and Gas Emission Analysis [ PDF / 428.43KB ]

Analysis of Denatured Fuel Ethanol with Brevis GC-2050 Using ASTM D5501 [ PDF / 234.49KB ]

On-line Monitoring of Flow Synthesis Reactions Using Nexera FV [ PDF / 9.4MB ]

Automated Gradient Optimization based on AI Algorithm for LC Method Development ~Simultaneous Analysis for Functional Components in Foods~ [ PDF / 638.7KB ]

Distinction of Polyethylene and Polypropylene by Infrared Spectrum [ PDF / 304.75KB ]

Real-Time Measurement of Thermal Curing Reaction of Automotive Paint Using FTIR [ PDF / 298.6KB ]

EGA/PY-3030D - Frontier Laboratories Multi-functional Pyrolyzer [ PDF / 1015.24KB ]

Comprehensive Approach for Successful Microplastics Analysis [ PDF / 1.72MB ]

Measuring Concentrations of CO and CO₂ in a Metal Wire Heat Treatment Furnace [ PDF / 217.38KB ]

Pyrolysis/Thermal Desorption -GC/MS for Deterioration Markers of Chemical Products [ PDF / 1.19MB ]

Evaluation of the Temperature Characteristics of Toner [ PDF / 363.4KB ]

Analysis of VOC and SVOC Emissions from Automotive Interior Materials Using GCMS-QP2050 in Accordance with VDA 278 [ PDF / 786.58KB ]

Evaluation of the Temperature Characteristics of General Purpose Plastics [ PDF / 236.91KB ]

Evaluation of Flowability of Thermosetting Resins [ PDF / 391.5KB ]

Improving Analytical Efficiency and Reliability of SPME Analysis through Optimal Selection of Vial Septa [ PDF / 438.84KB ]

Multilayer Film Analysis Using the AIRsight Infrared Raman Microscope [ PDF / 395.6KB ]

Analysis of Cigarette Odor Compounds by GC-MS, NDI, and Sensory Evaluation [ PDF / 2.14MB ]

Analysis of Impurities in Alcohol-Based Hand Sanitizers by GC-MS [ PDF / 476.15KB ]

FTIR Analysis of Recycled Plastics Using the Spectrum Advisor Function [ PDF / 595.4KB ]

High Purity Preparative Purification Enabled by UV/MS Trigger on LC-MS System [ PDF / 762.28KB ]

Seamless Purification Workflow from Analytical to Preparative in Single LC-MS System [ PDF / 560.68KB ]

Simple Screening Analysis of Detergent Using a Single Quadrupole Mass Spectrometer [ PDF / 440.22KB ]

No.512_Analysis of watercontent in acetone [ PDF / 184.01KB ]

No.493_Analysis of Organic solvent [ PDF / 162.99KB ]

No.485_Analysis of Organic solvent [ PDF / 262.64KB ]

No.483_Analysis of Organic solvent [ PDF / 171.1KB ]

No.464_Analysis of Styrene Impurities [ PDF / 145.61KB ]

No.463_Analysis of Solvent Mixture [ PDF / 174.2KB ]

No.411_Analysis of Organic Solvents [ PDF / 163.94KB ]

No.425_Analysis of Water and Ethanol in Acetone [ PDF / 136.56KB ]

No.360_Analysis of alcohols Using AutomatedInjection of Internal Standards [ PDF / 139.12KB ]

No.359_Analysis of ketones, esters, and ethers Using AutomatedInjection of Internal Standards [ PDF / 136.49KB ]

No.358_Analysis of aromatics Using AutomatedInjection of Internal Standards [ PDF / 134.94KB ]

No.346_Comparison of Separation Performance with Various Carrier Gases [ PDF / 160.05KB ]

No.317_Analyzing Organic Compound Species with Hydrogen Carrier Gas [ PDF / 165.1KB ]

No.316_Analyzing Organic Compound Species with Hydrogen Carrier Gas [ PDF / 181.02KB ]

Quantitative Determination of Surface Functional Groups of Cellulose Nanofibers Using Toluidine Blue O Adsorption Method​ [ PDF / 363.47KB ]

Compression Testing of toner under room temperature and high-temperature environment [ PDF / 506.55KB ]

Residual Solvents Analysis from Flexible Packaging Material using Brevis GC-2050 [ PDF / 662.06KB ]

Measurement of Total Carbon in Plastic Particles [ PDF / 362.62KB ]

TOC Evaluation of Sulfuric Acid [ PDF / 378.06KB ]

Simultaneous Analysis of Carboxylic Anhydrides and Hydrolysates Using Supercritical Fluid Chromatography [ PDF / 3.01MB ]

Analyzing Residual Solvents in Sucrose Fatty Acid Esters by HS-GC-FID Analysis (FCC11) [ PDF / 660.64KB ]

Multilayer Film Analysis Using the AIMsight Infrared Microscope [ PDF / 621.6KB ]

Analysis of Residual Ethylene Oxide in Medical Devices by Headspace Gas Chromatography (Water Extraction) [ PDF / 563.78KB ]

Evaluation of Carbon Deposition by Different Catalytic Processes in Dry Reforming of Methane (DRM) Reaction [ PDF / 589.7KB ]

Method Package Guidebook [ PDF / 14.85MB ]

Analysis of Formaldehyde Using HPLC and Post-Column Derivatization with Acetylacetone - High Performance Liquid Chromatography [ PDF / 728.8KB ]

Dynamic Observation of Strain Distribution in High-Speed Tensile Test [ PDF / 7.96MB ]

Confirmation of Synthesis of Sparingly Soluble Compounds by Accurate MALDI-TOF Mass Spectrometry-IMSC [ PDF / 602.53KB ]

No.7_Analysis of Urea [ PDF / 167.61KB ]

MIV-X [ PDF / 2.61MB ]

Confirmation of Synthesis of Sparingly Soluble Compounds by Accurate MALDI-TOF Mass Spectrometry [ PDF / 443.07KB ]

Analytical Solutions for Analysis of Polymer Additives [ PDF / 2.57MB ]

Analysis of Organic EL Materials and Impurities Using Single Quadrupole Mass Spectrometer [ PDF / 378.54KB ]

Analysis of Components Emitted during Photodegradation of Bionylon with Light-Induced Hydrolysis [ PDF / 701.84KB ]

High-Speed and Simultaneous Analysis of Active Ingredients CPC and GK2 in Mouthwash [ PDF / 239.87KB ]

Analysis of Carboxymethyl Cellulose Using an Integrated HPLC Syste [ PDF / 291.73KB ]

Analysis of PIP (3:1) in Plastic by Py/TD-GC-MS [ PDF / 656.9KB ]

Answering the Need for Fast Physical Property Mapping! Fast and High-Resolution Visualization of Mechanical Properties [ PDF / 1.45MB ]

Analysis of Additives in Food Containers Using LCMS-9030 Quadrupole Time-of-Flight Liquid Chromatograph Mass Spectrometer [ PDF / 542.83KB ]

Elemental Mapping of Epidote [ PDF / 531.21KB ]

Tensile Test of Plastic with SIE-560SA Automatic Extensometer (ISO 527 and JIS K7161) - Tensile Test of Plastics with Automatic Extensometer [ PDF / 1.58MB ]

Characterization of Polyethylene Materials by Thermal Analysis [ PDF / 285.04KB ]

Analysis of MEA (Membrane Electrode Assembly) [ PDF / 3.4MB ]

Compression Tests for Cell Aggregates [ PDF / 2.25MB ]

Hardness Test for Zirconia Particles [ PDF / 205.68KB ]

Evaluation of UV-Degraded Plastics by FTIR and Dynamic Ultra Micro Hardness Tester [ PDF / 206.49KB ]

Analysis of Active Ingredient Isopropyl Methylphenol in Medicated Soaps by Reversed Phase Chromatography [ PDF / 116.39KB ]

Evaluation of Fiber Length and Dispersibility of Mono-Dispersed Cellulose Nanofibers - Surface Observation [ PDF / 472.93KB ]

Estimation of Thermal History of Polymer Using DSC-60 Plus Differential Scanning Calorimeter [ PDF / 104.11KB ]

Determination of Ethanol Content in and Simple Fail/Pass Judgment of Alcohol Hand Sanitizer by FTIR - Fourier Transform Infrared Spectrophotometer (FTIR) [ PDF / 1.28MB ]

Approaches to Nanoparticles by SPM Observation and Size Distribution Analysis of Nanoparticles with Mixed Sizes - Scanning Probe Microscope SPM / Atomic Force Microscope AFM [ PDF / 243.5KB ]

Atomic Resolution Observation of Calcite by SPM-8100FM - High Resolution Scanning Probe Microscope HR-SPM / Frequency Modulation Atomic Force Microscope FM-AFM [ PDF / 629.94KB ]

Changes in the Optical Properties of Photochromic Compounds: Use of Lightway™ Photoreaction Evaluation System - Spectrophotometric Analysis [ PDF / 755.2KB ]

Evaluation of Elastic Modulus of Cellulose Nanofiber - Scanning Probe Microscope SPM / Atomic Force Microscope AFM [ PDF / 1.28MB ]

Differentiation of Resins in Carbon Fiber Reinforced Plastics (CFRP) by FTIR - Fourier Transform Infrared Spectrophotometer [ PDF / 391.68KB ]

Visualization of Photoinduced Charge Distribution of Au Nanoparticle Assembly by SPM - Scanning Probe Microscope (SPM) / Atomic Force Microscope (AFM) [ PDF / 1.8MB ]

High Speed GPC Analysis by Nexera™ GPC System: Calculation of Molecular Weight and Quantitative Analysis of Additives - High Performance Liquid Chromatography [ PDF / 122.19KB ]

Characterization of Biodegradable and Oxo-Biodegradable Plastic Bags [ PDF / 357.48KB ]

Element Mapping of Volcanic Rock from Mt. Asama - Electron Probe Microanalyzer [ PDF / 3.78MB ]

Application of Thermal Extraction-GC/MS to Food Contamination Analysis - Gas Chromatograph-Mass Spectrometry [ PDF / 447.83KB ]

Measurement of Film Thickness Using LabSolutions™ UV-Vis: Film Thickness Calculation by Interference Interval Method - Spectrophotometric Analysis [ PDF / 319.39KB ]

Trace Element Mapping of Plagioclase [ PDF / 1.32MB ]

Thermogravimetry (TG) of Cellulose Nanofibers [ PDF / 285.46KB ]

Analysis of Food Contaminants by EDX and FTIR - Dental Materials - - X-Ray Analysis [ PDF / 618.51KB ]

Hardness Test of Plastic Materials (ISO/TS 19278:2019) [ PDF / 387.78KB ]

Qualitative Analysis of UV-Absorbents in Cosmetics Based on UV-Vis Spectrum - High Performance Liquid Chromatography [ PDF / 87.49KB ]

High-Resolution and High-Speed Simultaneous Analysis of Regulated UV-Adsorbents in Cosmetics using SPP Column - High Performance Liquid Chromatography [ PDF / 71.58KB ]

High-Resolution and High-Speed Simultaneous Analysis of Preservatives in Cosmetics Using SPP Column - High Performance Liquid Chromatography [ PDF / 196.1KB ]

Quantitative Analysis of Recycled Plastics Using FTIR – Mixing Ratio Calculation Method – - Spectrophotometric Analysis [ PDF / 258.83KB ]

Quantitative Analysis of Recycled Plastics Using FTIR – Individual Calculation Method – - Spectrophotometric Analysis [ PDF / 281.79KB ]

Measurement of Time-dependent Change of Metal Nanoparticles - Application of Ultrafast Scanning Speed of UV-1900 - [ PDF / 836.54KB ]

X-Ray Fluorescence Analysis of Residual Catalysts - X-Ray Analysis [ PDF / 362.03KB ]

Quantitative Analysis of Film Thicknesses of Multi-Layer Plating Used on Cards - X-Ray Analysis [ PDF / 113.64KB ]

Analysis of Resin Using FTIR and Thermal Analysis - "Silent Change" - [ PDF / 148.96KB ]

Evaluating Optical Properties of Diamonds and Natural Gemstones [ PDF / 791.94KB ]

Three-point Bending Flexural Test for Plastics - Material Testing System [ PDF / 523.67KB ]

Thickness Determination of Film and Coating on Inside of Can Using IR Pilot - Spectrophotometric Analysis [ PDF / 1.9MB ]

Evaluation of Photonic Materials with Biomimetic Structural Coloration - Spectrophotometric Analysis [ PDF / 1.47MB ]

Rapid Measurement of Low-molecular Compounds Using a Benchtop MALDI-TOF Mass Spectrometer - MALDI-TOF Mass Spectrometry [ PDF / 305.1KB ]

Relationship Between Particle Size Distribution/Particle Shape and Optical Properties of Gold Nanoparticles - Spectrophotometric Analysis [ PDF / 1.47MB ]

Compositional and Structural Analysis of Polymer Materials Using a Size-Exclusion Chromatography Fractionation System for Pyrolysis-GC/MS and MALDI-MS [ PDF / 673KB ]

Quantifying "Silent Change" Using EDXIR-Analysis Software: EDX-FTIR Contaminant Finder/Material Inspector - Spectrophotometric Analysis [ PDF / 607.8KB ]

Haze Evaluation of Plastic Sheets and Films - Spectrophotometric Analysis [ PDF / 558.88KB ]

Measurement of Hexavalent Chromium in ChromateConversion Coating and Metal Ions in Eluate - Spectrophotometric Analysis [ PDF / 502.1KB ]

Color Evaluation of Structurally Colored Films by Angle of Incidence - Spectrophotometric Analysis [ PDF / 4.79MB ]

High Speed Monitoring of Pyridine Adsorbing on Surface of TiO2 Powder by Rapid Scan [ PDF / 1.49MB ]

Analysis by ICP Atomic Emission Spectrometry in Accordance with the ICH Q3D Guideline for Elemental Impurities Using ICPE-9820 [ PDF / 175.15KB ]

High-Sensitivity Analysis of Formic Acid Using GCBID in Artificial Photosynthesis Research [ PDF / 278.61KB ]

Simultaneous Analysis of Major and Trace Elements in Plating Solution by ICPE-9820 [ PDF / 831.73KB ]

Precision Analysis of Toxic Elements in Plastic by ICPE-9800 Series [ PDF / 934.39KB ]

X-Ray CT Observation of Fuel Cell MEA [ PDF / 2.61MB ]

Investigation of Additives in Plastics by FTIR-ATR Spectroscopy [ PDF / 1.81MB ]

Measurement of Metal Ion in Plating Solution by Flame Atomic Absorption [ PDF / 1.07MB ]

Measurement of Band Gap of Titanium (IV) Oxide - Spectrophotometric Analysis [ PDF / 466.35KB ]

Measurement of Elemental Impurities in Pharmaceutical Products by ICP-AES and ETAAS [ PDF / 870.27KB ]

Measurement of TOC in Electroplating Solution by TOC-LCSH [ PDF / 962.31KB ]

Quantitative Analysis of Antimony (Sb) in Plastics by EDXRF [ PDF / 1.7MB ]

Comprehensive Evaluation of Polymer Electrolyte Membrane (PEM) Using Thermal Analysis [ PDF / 332.72KB ]

Protein Thin Film Analysis by Reflection Absorption Spectroscopy and Single Reflection ATR - SPECTROPHOTOMETRIC ANALYSIS [ PDF / 57.85KB ]