4830 Controller - Specs
Servo Controller for Fatigue and Endurance System
Servo Controller 4830
| Display unit |
5.7-inch color LCD |
|---|---|
| Control method |
Full digital two-degree-of-freedom PID |
| Control signal input |
Test force (TD1), stroke (TD2), and external input (AUX) |
| External input/output |
Analog Output: 4 channels (±10 V), Input: 1 channel (±10 V) |
| Other functions |
Calculation function (such as adding, subtracting, averaging, and stress/strain), push testing function, consumable consumption time management function |
| Communications functions |
USB interface |
| Limit functions |
Measurement value 4-point limiter, cycle counter, external input |
| Control functions |
Amplitude, average gain correction (AGC), PID autotuning, sample anti-overloading function (contact load), user-specified phase differential control by synchronized operation, waveform distortion correction*1(transfer function correction) |
| Size |
W350 × D420 × H148 mm |
| Control panel |
Touch panel, function keys, jog dial, numeric keypad, test operation keys, power unit operation keys |
| Measurement functions |
1 range (rangeless) 24-bit |
| Waveform display functions |
Time, X-Y, and peak waveforms |
| Test parameter registration |
Max. 9 parameters |
| Slow settings |
Slow start/stop |
| Test frequency |
0.00001 to 1000 Hz |
| Test waveforms |
Sine, triangular, rectangular, haversine, haver-triangular, trapezoidal, ramp, 1/2 haversine, step, sweep, and random waves, external input, programmed waves (optional*1), file waves optional*1) |
| Power Requirements |
Single-phase AC 100 to 230 V*2 50/60 Hz 300 VA |
*1 Only during software use
*2 The standard power cord included with the system is only for AC 100 V.
4830 Controller
| Test waveforms |
Sine, triangular, rectangular, etc. |
|---|---|
| Amplifier |
Test force, stroke |
| Control mode |
Test force, stroke, virtual transducer |
| Power Requirements |
Single-phase 100 V, 300 VA |
