NJ-SERVO Series - Specs
Motor Driven Actuator
NJ-5kNV-100
| Test Force : Dynamic |
±5 kN |
|---|---|
| Test Force : Static |
±5 kN |
| Stroke (Full stroke) |
±100 mm (200 mm) |
| Max. speed |
Single wave: 72 cm/sec (unloaded) |
| Sensor Indicator Accuracy : Test Force |
±0.5 % indicated value, or ±0.02 % of the load cell rating, whichever is larger |
| Sensor Indicator Accuracy : Stroke |
±1 % indicated value, or ±0.1 % of the rating, whichever is larger |
| Actuator Unit Size : L0 |
1080 mm |
| Actuator Unit Size : L1 |
730 mm |
| Actuator Unit Size : L2 (Center Location) |
140 mm |
| Servo Amplifier Size : W x H x D |
700 x 715 x 552 mm |
| Weight |
Approx. 70 kg |
| Power Requirements |
3-phase 200 V, 7 kVA |
| Compatible Controllers |
Servo Controller 4830 |
| Amplitude Characteristics |
See amplitude characteristics diagrams. |
NJ-10kNV-100
| Test Force : Dynamic |
±10 kN |
|---|---|
| Test Force : Static |
±10 kN |
| Stroke (Full stroke) |
±100 mm (200 mm) |
| Max. speed |
Single wave: 72 cm/sec (unloaded) |
| Sensor Indicator Accuracy : Test Force |
±0.5 % indicated value, or ±0.02 % of the load cell rating, whichever is larger |
| Sensor Indicator Accuracy : Stroke |
±1 % indicated value, or ±0.1 % of the rating, whichever is larger |
| Actuator Unit Size : L0 |
1260 mm |
| Actuator Unit Size : L1 |
750 mm |
| Actuator Unit Size : L2 (Center Location) |
140 mm |
| Servo Amplifier Size : W x H x D |
700 x 1250 x 350 mm |
| Weight |
Approx. 110 kg |
| Power Requirements |
3-phase 200 V, 12 kVA |
| Compatible Controllers |
Servo Controller 4830 |
| Amplitude Characteristics |
See amplitude characteristics diagrams. |
NJ-SERVO
| Static/dynamic test force |
±1 kN, ±5 kN, ±10 kN, ±20 kN, ±30 kN |
|---|---|
| Effective stroke |
±100 mm (±150 mm) |