*Please note that the actual C-arm movements and operating procedures may differ.
Click on C-arm to change the FPD size, patient table type, and monitor type for the examination room.
You can place objects(devices, doors, pepole etc.) by dragging from selection window to anywhere in the layout space. You can move the object by dragging it, and rotate it by dragging the arrow.
Click on the wall or floor to select its color and design.
Check the "Fix its position" checkbox to fix the object to prevent incorrect operation.
You can save your planned layout data in JPG format by selecting "Save". When selecting "Load", you can reload the saved data.
*The grid lines on the floor are 10cm square, and the bold ones are 50cm square. *The grid lines on the floor are 4" square, and the bold ones are 2' square. *The grid lines on the floor are 4" square, and the bold ones 2' square. *Cables can not be displayed.
Green Line: Floor/Ceiling-mounted C-arm movement range
Yellow Line: Lateral C-arm movement range
Blue Line: Catheter table movement range
You can select the number, model type, and installing direction of the ceiling-mounted X-ray tube support CH-200. You can reverse its direction by checking "Flip back and forth".
*You can only measure between objects. You cannot measure open space.
You can move walls to any position by clicking the Move button and dragging wall lines.
You can add walls anywhere. Click the Draw button and select the start and end points by clicking. If the end point does not touch an existing wall, double-click to determine the endpoint.
You can erase walls. After clicking the Erase button, click the wall that you want to erase.
Select the system type to be installed in the angiography room from Floor-mounted single plane, Ceiling-mounted single plane, or Biplane.
*The grid lines on the floor are 50cm square. *The grid lines on the floor are 2' square.
Green Line: Floor/Ceiling-mounted C-arm movement range
Yellow Line: Lateral C-arm movement range
Blue Line: Catheter table movement range