Select the item, then simulate its movements/operations.
* Simulation for R/F table's movements are not available.
*Please note that the actual C-arm movements and operating procedures may differ.
Place Bucky Table, Stand or R/F table etc. as desired.
You can place items, doors, people, boxes (free shape) etc. inside and outside the room. You can move the object by dragging it, and rotate it by dragging the arrow.
The items marked "*" are not available in some regions.
Click on the wall or floor to select its color and design.
You can fix the place of the item by checking "Fix its position" to avoid wrong operation.
You can save your planned layout data in JPG format by selecting "Save". When selecting "Load", you can re-load the saved data.
*The grid lines on the floor are 10cm square, and the bold ones 50cm square. *The grid lines on the floor are 4" square, and the bold ones 2' square. *Cables can not be displayed.
Green Line: Floor/Ceiling-mounted C-arm movement range
Yellow Line: Lateral C-arm movement range
Blue Line: Catheter table movement range
You can select the number, model type, and installing direction of the ceiling-mounted X-ray tube support CH-200. You can reverse its direction by checking "Flip back and forth".
The distance between the two points is the distance between the object and the wall. You can't start and end in the air.
You can move the walls to any position by clicking the Move button and dragging the wall line.
You can add walls anywhere. Click the Draw button and click the start point you want to add a wall. Move the mouse until the end point, then click again. If the end point does not overlap another, double-click there.
You can erase a wall. After clicking the Erase button, click the wall that you want to erase.
You can choose the type of ceiling-mounted X-ray tube support. Depending on the type you choose, it may not be possible to select the 2nd tube.
Select the rail length and width for the ceiling-mounted X-ray tube support. Select "No Suspension" if you want to simulate a case that doesn't require the ceiling rails such as R/F room.
Select the rail length and width if you want to place two ceiling-mounted X-ray tube support. If this is not necessary, select "No Suspension".
*The grid lines on the floor are 50cm square. *The grid lines on the floor are 2' square.
Green Line: Floor/Ceiling-mounted C-arm movement range
Yellow Line: Lateral C-arm movement range
Blue Line: Catheter table movement range