Automotive - Related Information

Videos

Composite Materials Analysis and Mechanical Testing Solutions

Material Testing

Universal / Tensile Testing Machine Systems

When you're working with innovative materials, you need innovative solutions. Shimadzu’s precision-engineered solutions help you deliver fast, accurate results while adhering to ASTM and ISO standards for a variety of testing methods including tensile, compression, bending, impact, and fatigue.
Multifaceted Evaluation of High-Tensile Strength Joints b/w Dissimilar GA Steel & Al Sheet Materials

Material Testing

Non-Destructive Testing (NDT) Systems

Surface Analysis

This video shows examples and effectiveness of multifaceted evaluation of joint of dissimilar materials with ultrasonic optical defect detector, X-ray CT system, electron probe microanalyzer (EPMA), and precision universal testing machine.
EPMA System for Evaluation of the Distribution of Constituent Components in Detailed Areas in Joints

Electron Probe Microanalyzer (EPMA)

This video shows the utility of using an EPMA system to evaluate the distribution of constituent components in detailed areas of joints with dissimilar materials.
Utility of Using X-Ray CT to Non-Destructively Observe Joints between Dissimilar Materials

Non-Destructive Testing (NDT) Systems

The X-ray CT system is useful for non-destructive inspection and analysis of dissimilar materials.

Downloads

Download documents related to the Automotive field from here:

Endurance Test and Dynamic Three-Dimensional DIC Analysis of Outer Case of Electric Vehicle Motors [ PDF / 1.38MB ]

Analysis of VOC and SVOC Emissions from Automotive Interior Materials Using GCMS-QP2050 in Accordance with ISO 12219-11 [ PDF / 699.59KB ]

Sensitivity Evaluation and Example Analysis of Microscopic Targets with Thermoelectrically Cooled MCT Detector [ PDF / 303.06KB ]

Mapping Measurement of Paints and Pigments with Thermoelectrically Cooled MCT Detector [ PDF / 430.12KB ]

Analysis of Stain-like Deposits on the Surface of Metal Machined Parts for the Transportation Industry Using the AIRsight Infrared/Raman Microscope [ PDF / 530.78KB ]

Real-Time Measurement of Thermal Curing Reaction of Automotive Paint Using FTIR [ PDF / 298.6KB ]

Evaluation of Particle Properties of Lithium-Ion Battery Anode Materials —Particle Size Distributions and Shapes— [ PDF / 1.33MB ]

Nondestructive Analysis of Automotive Parts Used in Advanced Driver-Assistance Systems (ADAS) [ PDF / 1.31MB ]

Measuring the Bulk Density of Graphite Powder [ PDF / 378.81KB ]

Analysis of VOC and SVOC Emissions from Automotive Interior Materials Using GCMS-QP2050 in Accordance with VDA 278 [ PDF / 786.58KB ]

𝒓-Value Determination with Video Type Non-Contact Extensometer (ISO 10113:2020) [ PDF / 290.62KB ]

State Analysis of Iron Oxides in Sintered Ore for Steel Making [ PDF / 1.29MB ]

Determination of Trace Amounts of Sulfur Compounds in Gases by GC-SCD [ PDF / 513.35KB ]

Introducing the XSeeker 8000 Bench-Top X-Ray CT System [ PDF / 559.88KB ]

Functional Brain Analysis with Near-Infrared Spectroscopy [ PDF / 5.63MB ]

ISO 10113:2020 𝒓-Value Determination [ PDF / 401.47KB ]

Evaluation of Electric Vehicle (EV) Motor Shafts Produced by Radial Forging [ PDF / 366.37KB ]

Multifaceted Evaluation of Plastics: Differences due to Kneading Conditions [ PDF / 402.16KB ]

Multifaceted Evaluation of Plastics: Differences due to PC/ABS Resin Compounding Ratio [ PDF / 1.02MB ]

No.473_Analysis of VOCs [ PDF / 233.55KB ]

No.408_Analysis of Halogenated hydrocarbons and Glycol ethers [ PDF / 162.41KB ]

Void Analysis and Shape Analysis of Inverter Component with Microfocus X-Ray CT System [ PDF / 1.22MB ]

High Speed Tensile Test and Fracture Analysis of EV Drive Motor Shaft Produced by Radial Forging [ PDF / 3.08MB ]

Multifaceted Evaluation of EV Drive Motor Shaft Produced by Radial Forging [ PDF / 5.65MB ]

Measurement of VOCs by Thermal Desorption GC-MS Using Hydrogen Carrier Gas [ PDF / 193.01KB ]

Evaluation of EV Drive Motor Shaft by Radial Forging Process - Confirmation of Correlation between Hardness Distribution and Element Distribution [ PDF / 674.05KB ]

Evaluation of EV Drive Motor Shaft Produced by Radial Forging: Elemental Mapping Analysis by EPMA [ PDF / 5.81MB ]

Inspection of Defects in an Automotive Inverter Component with X-Ray Inspection System [ PDF / 1.22MB ]

Analysis of Fe-Al Bonded Dissimilar Materials by EPMA and X-Ray CT [ PDF / 769.05KB ]

High Sensitivity Measurement of Ultra-Trace Amount of Silicone Oil by IRXross [ PDF / 432.81KB ]

Improvement of Test Control of Fatigue Testing Machine Subject to Horizontal Load using a Gas Bearing [ PDF / 259.43KB ]

Visualization of Current Distribution by ZXY Measurement: Current Measurement of Graphite Sample [ PDF / 477.45KB ]

Analysis of Bonded Interface of Friction Stir Spot Welded Materials [ PDF / 1.43MB ]

Importance and Ingenuity of Vibration Noise Reduction on High-Speed Tensile Tests [ PDF / 560.82KB ]

Dynamic and Fatigue Testing Systems [ PDF / 68.74MB ]

SPM Observation of Physical Property Distribution in Ultra-Small Regions of Resin Film [ PDF / 1.49MB ]

Using the CGT-7100 to Analyze Carburizing Furnace Atmosphere [ PDF / 1.15MB ]

Realizes high definition, high resolution and high throughput! Rich features of the latest X-ray inspection system [ PDF / 545.21KB ]

High Speed Tensile Test of High-Strength Steel [ PDF / 394.17KB ]

Compressive Test of CarbonFiber Reinforced plastic (JIS K7018 and ASTM D3410) - Evaluation of Temperature Dependent In-Plane Compressive Properties of Carbon Fiber Reinforced Plastic [ PDF / 1.17MB ]

Rapid Detection of Illicit Drugs and Psychoactive Plant Component by Green Technology DPiMS-8060 [ PDF / 941.9KB ]

Evaluation of UV-Degraded Plastics by FTIR and Dynamic Ultra Micro Hardness Tester [ PDF / 206.49KB ]

Analysis of Positive Electrode (NCM) for Lithium Ion Battery by EPMA and SPM [ PDF / 1.37MB ]

State Analysis of Iron Oxide Scale [ PDF / 1.65MB ]

Observation of Carbon Fiber Reinforced Thermoplastic (CFRTP) with inspeXio™ SMX™-225CT FPD HR Plus [ PDF / 1.55MB ]

Tensile and Compressive Test of Resin and Alumina Ceramic with Varying Sampling Rate - Influence of Sampling Speed on Strength Value [ PDF / 506.61KB ]

Analysis of Automotive Three-Way Catalyst [ PDF / 1.19MB ]

Basics & Fundamentals: Gas Chromatography [ PDF / 1.13MB ]

Verification and Validation (V&V) of Uniaxial Tensile Test Simulation Results of Composite Materials: Fusion of Actual Measurement and Homogenization Analysis [ PDF / 2.28MB ]

Evaluating the Performance of the LotusStream Gas-Liquid Separator for Preparative Supercritical Fluid Chromatography [ PDF / 1.2MB ]

Optimization of Analytical Conditions, and Scale-up from Analytical to Preparative Scale Using Supercritical Fluid Chromatography [ PDF / 506.29KB ]

Using i-PeakFinder™, an Automatic Peak Integration Algorithm, to Provide Labor Savings and Improve the Efficiency of Analytical Operations - -Example of its Application to Organic Acid Analysis- [ PDF / 568.88KB ]

New Analytical Intelligence Concept - Support for Automating Analytical Operations - The idea to support the novel workflow automation for analytical and testing operation [ PDF / 888.86KB ]

Observation of Automobile Ignition Coil Using X-Ray CT System [ PDF / 1.78MB ]

Measurement of Paint Bake Hardening of Metals Conforming to JIS G 3135 Annex A [ PDF / 999.05KB ]

LABNIRS - functional Near-Infrared Spectroscopy System for Research [ PDF / 3.36MB ]

Measurement Examples of Glass in Various Shapes - Spectrophotometric Analysis [ PDF / 239.14KB ]

Analysis of VOC and SVOC Emissions from Automotive Interior Materials in Accordance with VDA278 Using the Thermal Desorption Method - GC-MS [ PDF / 152.64KB ]

Analysis of High Carbon Chromium Bearing Steel - Electron Probe Micro Analyzer [ PDF / 1.04MB ]

Automobile Evaluation Instruments - For the Development and Safety of Next-Generation Automobiles [ PDF / 12.87MB ]

High-Speed Imaging of Fuel Injection in Automotive Engines [ PDF / 4.74MB ]

Observations of a Resin Cable Clamp Using the inspeXio SMX-90CT Plus Benchtop Micro Focus X-Ray CT System [ PDF / 2.58MB ]

Observations of Resin Connectors Using an X-Ray CT System [ PDF / 1.27MB ]

Compression Test on Brake Friction Materials by Shimadzu MCT-W500 Micro Compression Testing Machine [ PDF / 1.15MB ]

Determination of Ethanol Content of Denatured FuelEthanol by ASTM D5501-04 - Gas Chromatography [ PDF / 1.25MB ]

Internal Observation of FluorescentLamps and Automotive Light Valves - Industrial X-Ray Inspection System [ PDF / 406.37KB ]

Analysis of Biodiesel Blends by FTIR - Spectrophotometric Analysis [ PDF / 219.76KB ]

Analysis of paint scrapings using an infrared microscope - SPECTROPHOTOMETRIC ANALYSIS [ PDF / 80.64KB ]

Use of Open Tubular Capillary Column (Guard Column) [ PDF / 80.79KB ]

Analysis of Sulfur Compound in Gasoline by GC-FPD - GAS CHROMATOGRAPHY [ PDF / 81.12KB ]